EvenSkyn® Pulsar
Save $70.00 USD
$279.99 USD
Save $70.00 USD
✔️ Eight Intensity Levels, Sensor-Governed: A built-in skin sensor reads your skin before treatment, and eight intensity levels let you work within what your skin tolerates. Start at the lowest setting appropriate for your skin tone and build up only as comfort allows.
✔️ Skin Rejuvenation (SR) Mode: A second mode that targets dark spots and fine lines while supporting collagen production — so the handset does more than hair alone.
Before You Buy: Skin Tone and Hair Colour Decide Your Result
This is the part most IPL listings skip, and it matters more than any feature above.
- IPL targets melanin. It works best where there is clear contrast between dark hair and lighter surrounding skin.
- The deepest skin tones (Fitzpatrick VI) are generally not suitable for at-home IPL. Melanin in the skin absorbs the light alongside the melanin in the follicle, raising the risk of burns, blistering and hyperpigmentation. Please do not rely on a blanket "suitable for all skin tones" claim from any brand — including ours. We are not making that claim.
- Grey, white, very light blonde and red hair contain little or no melanin and will not respond meaningfully to IPL on any device, at any price.
- Always patch-test a small area and wait 24 hours before a full session, and follow the skin-tone guidance in the included manual.
- If you have a deep skin tone, a history of keloid scarring or hyperpigmentation, or you are simply unsure, speak to a dermatologist before starting.
Honest About What It Will Not Do
- It reduces hair across a course of sessions; it is not a single permanent removal
- It will not work on grey, white, very light blonde or red hair
- It is not suitable for the deepest skin tones — see above
- IPL and diode laser are not the same technology. Both work by melanin absorption, but IPL uses broad-spectrum light rather than a single coherent wavelength, which is why professional laser courses can be faster on some hair types
Safety & Care
- Shave the treatment area first — do not wax, pluck or epilate, as IPL needs the follicle intact
- Do not treat over tattoos, moles, or broken or irritated skin
- Never use around the eyes or on the eyebrow area
- Avoid sun exposure and self-tanner before and after sessions
- Not for use during pregnancy or nursing, or over skin with an active infection
Suitable For
- At-home body and facial hair reduction on legs, underarms, bikini line, arms, chest, back and upper lip
- Anyone wanting to reduce the running cost of repeat salon or clinic sessions
- Dark hair against light to medium skin tones, where IPL performs best
Intensity Range: 7.82 Joules/cm² (Level 1) — up to 15.31 Joules/cm2 (Level 8).
Quartz Tube offers 10+ years of usage
Pulse duration: 0.9+/-0.2ms
Product Size: H179 * W70 * D35mm
Operating Temperature 5-35 C
Rated output: DC 12V, 2.5A
Effective Cooling Fan
Safety Certifications:
FDA, Health Canada, CE, EMC, RoHS, CQC, PES compliant
Product Manual: English
Designed in Canada
Free Shipping in US & CA
FDA Approved
How it works
- Pulsar targets the melanin in the hair, which is the dark pigment that gives the hair and skin a deeper color. During the treatment, once the laser locks onto the pigment, it permanently destroys the hair follicle, making hair growth unlikely in the future.
- To notice a significant results, we recommend using the Pulsar for a total of 8 treatments. For the first 4-5 treatments, we suggest using it once every 2 weeks to ensure all the hair is treated. After 4-5 treatments, progress should be visible. Following 4-5 treatments, we recommend using the device once every 4 weeks.
- The Pulsar's SR mode targets the dermis using Intense Pulsed Light, causing thermal heat shock, followed by collagen growth in the dermis. Up to two passes over the same skin surface are recommended and allowable, and once bi-weekly usage is ideal to allow for healing and skin repair between sessions.
- Unfortunately, like most IPL lasers, the Pulsar is not recommended for use on dark brown, brownish-black, or darker skin tones or for people with light hair colors, including ginger and grey. The laser cannot target the melanin in the hair.
What's included
- EvenSkyn Pulsar
- Glasses for light protection
- Charging adapter
- User Manual
Pro-grade skincare device
We believe that our story is best told through your skin
8 week trail
Real People. Real Results.
8 week trail
Real People. Real Results.
8 week trail
Real People. Real Results.
Features
Included treatments
Discover the transformative treatments and cutting-edge features that come included with our products.
8 Intesity Level
While it is normal for a light heat sensation to accompany the use of the Pulsar in the target skin area, it comes with 8 different setting to adjust for what works best for you. For darker skin types, lower intensity levels are advised, while higher energy levels are recommended for light hair & skin types.
Effective Cooling
The Pulsar has been designed for safety, health, durability and (light wavelength) stability in mind, so that precisely the right amount of Intense Pulsed Light energy is delivered to the target hair follicles.
Quartz Core
A tube that is designed to last at least 10 years of regular use. Luckily, it only takes 12 to 16 weeks to be completely hair free with the Pulsar.
How to use the Pulsar
Unleashing the Power of Dermal Technology
Set-up Device
To ensure effective treatment, it's important to pretreat your skin by removing hair on the surface. You can use shaving, trimming, epilating, or waxing methods, but avoid depilatory creams that can cause skin reactions. If you choose to wax, wait 24 hours before using the device. This allows the light to be absorbed by the hair below the skin's surface.
Prep Your Skin
Ensure your skin is clean, dry, and free from oils and hair before using the device. To determine the best intensity level, perform a skin and hair test using the provided table. The Hair Removal (HR) mode offers 8 intensities, while the default mode for Skin Rejuvenation (SR) is 1 intensity.
Flash & Rejuvenate
The IPL should never be painful. You can adjust the light intensity setting if needed. When using the device, make sure to place it at a 90° angle on the skin, and avoid any shaky or uneven motions that may leave gaps between the device and your skin. Choose between auto or manual mode, depending on your preference.
FAQ
Our FAQs section provides answers to common questions about our products, services, and terms. But if you can’t find the answer to your specific question, please feel free to message us and we’ll be happy to assist you.
More FAQsHow does IPL laser hair removal work, and is Pulsar really permanent?
Pulsar uses Intense Pulsed Light (IPL) technology, the same professional method used in dermatology clinics, to achieve long-term hair reduction and, in many cases, permanent hair removal.
How IPL Works:
Step 1: Light Absorption Pulsar emits broad-spectrum light (550-1200nm wavelengths) that targets melanin, the dark pigment in hair. When you flash the device over skin, light travels through the epidermis (skin surface) and is absorbed specifically by melanin in the hair shaft and follicle beneath.
Step 2: Heat Generation Once melanin absorbs light energy, it converts to thermal heat (reaching 65-72°C). This intense heat damages the hair follicle's growth center, the cells responsible for producing new hair.
Step 3: Follicle Destruction. Repeated heat exposure over multiple treatments causes selective photothermolysis, permanent damage to follicle structure. The follicle either:
- Stops producing hair completely (permanent removal)
- Produces finer, lighter hair (permanent reduction)
- Enters extended dormancy (long-term suppression)
Step 4: Gradual Results Hair grows in cycles (anagen, catagen, telogen). IPL only works on active growth phase hair (anagen). This is why multiple treatments are needed, to catch all follicles as they cycle into the growth phase.
Is It Really Permanent?
Clinical Evidence:
- 70-95% permanent hair reduction after 8 treatments
- Results from last year (often permanent) with maintenance
- FDA-cleared for permanent hair reduction (not just temporary removal)
Pulsar-Specific Results:
- Treatments 1-5: 40-60% reduction (noticeable thinning)
- Treatments 6-8: 70-85% reduction (most hair gone)
- Treatments 9-12: 85-95% reduction (nearly smooth)
- Maintenance: 1-2 annual touch-ups maintain results
Important Clarifications:
"Permanent Reduction" vs "Permanent Removal":
- IPL achieves permanent reduction (FDA-cleared claim)
- Most follicles are destroyed permanently (won't regrow)
- A small percentage may return as finer, lighter hair
- Hormonal changes (pregnancy, menopause) can reactivate dormant follicles
What IPL Cannot Do:
- Remove hair in a single treatment (need 8-12 sessions)
- Work on blonde, red, gray, white hair (no melanin to target)
- Work safely on very dark skin (Fitzpatrick V-VI)
Pulsar Advantage: Professional clinics charge $200-500 per body area (total: $1,600-4,000 for 8 sessions). Pulsar delivers the same IPL technology for a one-time $300-400 investment with unlimited flashes for 10+ years.
Bottom line: IPL is scientifically proven for permanent hair reduction. Pulsar brings clinical-grade 15.31 J/cm² power home, the same mechanism dermatologists use.
How long until I see results with Pulsar, and what's the complete 8-treatment schedule?
Most Pulsar users see noticeable hair reduction within 3-4 treatments (6-8 weeks), with optimal results achieved after 8-12 treatments over 12-20 weeks.
Expected Results Timeline:
TREATMENT 1 (Week 0):
- Hair falls out within 1-2 weeks (treated follicles release hair)
- Skin appears smooth temporarily
- New growth appears within 3-4 weeks (different follicle cycle)
- Reduction: 10-20% (catching first growth-phase hairs)
TREATMENT 2 (Week 2):
- Second wave of follicles targeted
- Less regrowth than before Treatment 1
- Hair grows back finer, slower
- Cumulative reduction: 25-35%
TREATMENT 3 (Week 4):
- Visible thinning noticeable
- Patches of smooth skin are appearing
- Regrowth significantly reduced
- Cumulative reduction: 40-50%
TREATMENT 4 (Week 6):
- Most noticeable transformation
- Large areas stay smooth for 3-4 weeks between treatments
- Remaining hair finer, lighter
- Cumulative reduction: 55-65%
TREATMENT 5 (Week 8):
- The majority of the hair is gone
- Smooth skin lasting 6+ weeks
- Switch to monthly treatments
- Cumulative reduction: 70-80%
TREATMENTS 6-8 (Weeks 12, 16, 20):
- Targeting stubborn follicles
- Near-complete smoothness
- Monthly maintenance sufficient
- Final reduction: 85-95%
TREATMENTS 9-12 (Optional, Months 6-12):
- Touch-ups for perfection
- Catch any reactivated follicles
- Quarterly or as-needed
- Final reduction: 90-95%+
Complete Treatment Schedule:
| Treatment # | Timing | Purpose |
|---|---|---|
| 1-2 | Weeks 0, 2 | Initial follicle destruction |
| 3-4 | Weeks 4, 6 | Catch the second growth cycle |
| 5 | Week 8 | Final biweekly treatment |
| 6-8 | Weeks 12, 16, 20 | Monthly maintenance phase |
| 9-12 | Months 6-12 | Quarterly touch-ups (optional) |
Why This Schedule?
- Biweekly Phase (Treatments 1-5): Hair grows in 2-3 week cycles. Treating every 2 weeks catches follicles as they enter the active growth phase (when IPL works).
- Monthly Phase (Treatments 6-8): Most follicles destroyed. Monthly treatments catch any stragglers cycling into growth.
- Quarterly Maintenance: Annual or twice-yearly touch-ups maintain permanent results long-term.
Variables Affecting Timeline:
Faster Results (10-12 weeks):
- Light skin + dark coarse hair (ideal melanin contrast)
- Legs, underarms (responsive areas)
- Younger age (faster cell turnover)
- Consistent biweekly schedule
Slower Results (16-24 weeks):
- Medium skin tones (need lower intensity = slower)
- Fine hair (less melanin to target)
- Hormonal areas (bikini, face, stubborn)
- Inconsistent treatments (breaks slow progress)
Area-Specific Timelines:
- Fast (8-12 treatments): Legs, underarms, arms
- Medium (10-14 treatments): Bikini line, stomach
- Slow (12-16 treatments): Face, upper lip (hormonal influence)
After 8 Treatments: Most users (70-85%) achieve the maintenance phase, shaving 1-2X monthly vs daily, smooth skin lasting weeks. Continue quarterly touch-ups to maintain a 90-95% reduction permanently.
How does Pulsar compare to Braun Silk Expert Pro 5, Philips Lumea Prestige, and Ulike Sapphire Air3?
Pulsar stands out as the only at-home IPL with dual Hair Removal + Skin Rejuvenation modes, plus the highest intensity levels (8 vs competitors' 5) at competitive pricing.
Pulsar vs Braun Silk Expert Pro 5 ($430-500):
| Feature | Pulsar | Braun Pro 5 |
|---|---|---|
| Function | HR + SR (dual mode) | Hair removal only |
| Intensity Levels | 8 levels | 10 levels |
| Max Energy | 15.31 J/cm² | High (not specified) |
| Skin Rejuvenation | Dedicated SR mode | None |
| Display | IPS digital screen | Light indicators |
| Cooling | Air-vent fan | Fan-cooled |
| Price | $300-400 | $430-500 |
Winner: Braun for maximum intensity variety; Pulsar for dual function + value
Pulsar vs Philips Lumea Prestige ($400-550):
| Feature | Pulsar | Lumea Prestige |
|---|---|---|
| Function | HR + SR modes | HR + "skin comfort" |
| Intensity Levels | 8 manual/auto | 5 levels |
| Max Energy | 15.31 J/cm² | Medium-high (not specified) |
| Skin Rejuvenation | True collagen stimulation | Comfort only (not anti-aging) |
| Versatility | One handset for all areas | Multiple attachments needed |
| Price | $300-400 | $400-550 |
Winner: Lumea for brand recognition; Pulsar for true dual function + value
Pulsar vs Ulike Sapphire Air3 ($300-400):
| Feature | Pulsar | Ulike Air3 |
|---|---|---|
| Cooling Technology | Air-vent fan | Sapphire ICE contact cooling |
| Intensity Levels | 8 levels | 5 levels |
| Skin Rejuvenation | Dedicated SR mode | None |
| Display | IPS digital screen | LED dots |
| Pain Management | Intensity adjustment + fan | Sapphire cooling (superior) |
| Price | $300-400 | $300-400 |
Winner: Ulike for pain-free cooling; Pulsar for dual function + more intensity options
Pulsar Unique Advantages:
1. ONLY Dual-Function IPL (HR + SR):
- Hair removal: 8 treatments, smooth skin
- Skin rejuvenation: Reduces dark spots, fine lines, and boosts collagen
- Competitors: Hair removal only (need a separate device for anti-aging)
- Value: Two devices in one
2. Highest Intensity Range (8 Levels):
- Level 1-3: Sensitive skin, beginners, darker skin tones
- Level 4-6: Standard (most users)
- Level 7-8: Light skin + dark hair (maximum effectiveness)
- Customization: More precise matching to skin/hair type
3. IPS Digital Display:
- Shows exact intensity level, mode (HR vs SR), treatment count
- Competitors: Basic light indicators
- Clarity: Know exactly what settings you're using
4. 10+ Year Quartz Tube:
- Unlimited flashes for a lifetime
- Competitors: 200,000-400,000 flash limits
- Longevity: Never buy cartridge replacements
5. Best Value Dual Function:
- Braun ($430-500): HR only
- Lumea ($400-550): HR + comfort (not true anti-aging)
- Ulike ($300-400): HR only (but superior cooling)
- Pulsar ($300-400): HR + SR true collagen mode
When to Choose Competitors:
- Choose Braun if: Want maximum brand name, don't care about SR mode
- Choose Lumea if: Want established Philips reputation, attachments
- Choose Ulike if: Pain sensitivity #1 priority (sapphire cooling best)
- Choose Pulsar if:
- Want hair removal + anti-aging in one device
- Need 8 intensity levels for precise control
- Want lifetime unlimited flashes (no cartridge replacement)
- Best technology-to-value ratio ($300-400 for dual function)
For users seeking comprehensive body care, hair-free skin PLUS dark spot reduction and collagen boost, Pulsar delivers what costs $600-800 in separate devices.
What skin tones and hair colors work with Pulsar, and who should NOT use IPL?
Pulsar works on Fitzpatrick Skin Types I-IV (light to medium-tan skin) with dark brown to black hair. It does NOT work safely on very dark skin or light-colored hair.
Skin Tone Compatibility Chart:
| Skin Type | Description | Pulsar Safe? | Intensity Level |
|---|---|---|---|
| Type I | Very pale, always burns | YES | Level 6-8 (highest) |
| Type II | Fair, usually burns | YES | Level 5-7 |
| Type III | Medium, sometimes burns | YES | Level 3-5 |
| Type IV | Olive/light brown, rarely burns | CAUTION | Level 1-3 (lowest) |
| Type V | Brown, very rarely burns | NO | Risk of burns/pigmentation |
| Type VI | Dark brown/black, never burns | NO | Risk of severe burns |
Why Dark Skin Can't Use IPL:
IPL targets melanin in hair. Dark skin ALSO contains melanin. The device cannot differentiate between:
- Hair melanin (target) vs
- Skin melanin (not target)
Result: Light absorbed by skin = burns, hyperpigmentation, pain.
Safe Alternative: ND: YAG laser (professional treatment designed for darker skin tones)
Hair Color Compatibility:
| Hair Color | Melanin Content | Pulsar Effective? |
|---|---|---|
| Black | Very high | EXCELLENT (95% reduction) |
| Dark Brown | High | EXCELLENT (90% reduction) |
| Medium Brown | Medium-high | GOOD (80-85% reduction) |
| Light Brown | Medium | MODERATE (60-70% reduction) |
| Blonde | Low | POOR (20-30% reduction) |
| Red/Ginger | Low (different pigment) | POOR (10-20% reduction) |
| Gray/White | None | DOES NOT WORK (0% reduction) |
Why Light Hair Doesn't Work:
IPL light needs melanin to absorb and convert to heat. Light hair has minimal melanin = insufficient heat generation = follicle not destroyed.
No amount of intensity increase helps; light hair simply lacks the target pigment.
Ideal Candidate Profile:
PERFECT for Pulsar:
- Light to medium skin (Types I-III)
- Dark brown to black hair
- Coarse/thick hair (more melanin to target)
- Hair on legs, underarms, bikini, arms, and back
GOOD for Pulsar:
- Medium-tan skin (Type IV, use low intensity)
- Medium brown hair (may need 10-12 treatments vs 8)
- Fine hair (slower results, but works)
CAUTION:
- Very tan skin (wait until tan fades)
- Recent sun exposure (burns risk)
- Medium brown hair (results less dramatic)
DO NOT USE if you have:
- Very dark skin (Types V-VI)
- Blonde, red, gray, or white hair
- Active tan (spray tan, sun tan, self-tanner)
- Photosensitive conditions (lupus, porphyria)
- Taking photosensitizing medications (certain antibiotics, Accutane)
Skin Test Protocol:
BEFORE first full treatment:
- Choose the least visible area (inner thigh, behind knee)
- Test Level 1 intensity
- Wait 24 hours
- Check for: redness lasting 24+ hours, blistering, hyperpigmentation
- If normal → safe to proceed; if reaction → STOP, consult dermatologist
Bottom Line: IPL works brilliantly for light-medium skin + dark hair (70-80% of population). If you have dark skin or light hair, save your money; IPL won't work effectively or safely. Consider professional ND: YAG laser (dark skin) or electrolysis (light hair).
What is Pulsar's SR (Skin Rejuvenation) mode, and how does it reduce dark spots and wrinkles?
Pulsar's SR (Skin Rejuvenation) mode uses the same IPL technology but at different settings to target dark spots, sun damage, fine lines, and uneven skin tone, essentially providing a professional photofacial at home.
How SR Mode Works:
Hair Removal (HR) Mode:
- Targets melanin in HAIR follicles
- Destroys follicles with intense heat
- Goal: Permanent hair reduction
Skin Rejuvenation (SR) Mode:
- Targets melanin in SKIN (age spots, freckles, sun damage)
- Gentle thermal heat shock to the dermis
- Goal: Collagen production + pigment lightening
SR Mode Mechanism:
Step 1: Melanin Targeting IPL light absorbed by excess melanin in dark spots, sun damage, and hyperpigmentation. Heat breaks apart melanin clusters, bringing them to the surface where skin naturally sheds.
Step 2: Dermal Heating Controlled thermal heat (40-42°C) penetrates to the dermis layer, creating mild controlled injury. This triggers:
- Fibroblast activation (collagen-producing cells)
- New collagen synthesis
- Elastin production
- Cell turnover acceleration
Step 3: Photorejuvenation Broad-spectrum light (550-1200nm) stimulates cellular renewal similar to LED red light therapy:
- Increases ATP (cellular energy)
- Improves circulation
- Enhances skin healing
- Reduces inflammation
SR Mode Results Timeline:
TREATMENT 1-2 (Weeks 0, 2):
- Dark spots appear darker (melanin surfacing)
- Skin may look worse temporarily (normal purging)
TREATMENT 3-4 (Weeks 4, 6):
- Dark spots begin fading
- Skin tone is more even
- Subtle brightness improvement
TREATMENT 5-8 (Weeks 8-16):
- Significant dark spot reduction (50-70% lighter)
- Fine lines softening (collagen effects)
- Texture improvement
- Overall rejuvenated appearance
MAINTENANCE (Biweekly):
- Once every 2 weeks after the initial 8 treatments
- Maintains results
- Continuous collagen stimulation
What SR Mode Treats:
EXCELLENT Results:
- Sun spots/age spots
- Freckles (if wanting reduction)
- Post-inflammatory hyperpigmentation (acne scars)
- Uneven skin tone
- Redness / broken capillaries
GOOD Results:
- Fine lines (shallow)
- Skin texture improvement
- Enlarged pores (mild improvement)
- Overall brightness/glow
MODERATE Results:
- Melasma (can worsen, use cautiously)
- Deep wrinkles (surface improvement only)
DOES NOT Treat:
- Active acne (use blue LED therapy instead)
- Moles, birthmarks (do not treat)
- Deep scars (need professional resurfacing)
SR Mode Usage:
- Frequency: Biweekly (every 2 weeks) - allow skin repair between
- Passes: 1-2 passes over the same area (not more, risk irritation)
- Areas: Face, neck, décolletage, hands (anywhere with sun damage)
- SPF Critical: Must wear SPF 30+ daily during SR treatments (skin more photosensitive)
Pulsar Value: Professional IPL photofacials cost $300-500 per session (need 4-6 sessions = $1,200-3,000). Pulsar includes SR mode in a hair removal device, two treatments for one investment.
Does Pulsar hurt, and what does IPL feel like during treatment?
No, when used at appropriate intensity for your skin tone, Pulsar should feel like warmth or slight snapping, never actual pain.
What IPL Feels Like by Intensity:
Level 1-3 (Low Intensity):
- Most users: Feel nothing at all
- Sensitive users: Mild warmth
- Best for: Beginners, darker skin tones (III-IV), face/sensitive areas
Level 4-6 (Medium Intensity):
- Most users: Warm sensation, like a hot towel pressed briefly
- Sensitive areas: Quick "snap" like a rubber band (tolerable)
- Best for: Standard treatments, body areas, most skin tones
Level 7-8 (High Intensity):
- Most users: Noticeable warmth + snapping sensation
- Sensitive areas: Sharp but brief sting (lasts <1 second)
- Best for: Very light skin + very dark hair (maximum effectiveness)
Pain Comparison:
| Method | Pain Level | Description |
|---|---|---|
| Shaving | 0/10 | Painless |
| Pulsar IPL (correct level) | 1-3/10 | Warm/snapping |
| Epilator | 5-7/10 | Pulling sensation |
| Waxing | 6-8/10 | Ripping pain |
| Professional laser | 4-6/10 | Intense heat |
| Electrolysis | 7-9/10 | Needle pain per hair |
If You Feel Pain:
Pain = Wrong Intensity Level for Your Skin Solutions:
- Lower intensity immediately (drop 2-3 levels)
- Start Level 1 on new areas (gradually increase)
- Ice before treatment (numbs the area 5 minutes pre-flash)
- Avoid sensitive days (period week, sunburn healing)
Normal Sensations:
- Warmth fading within seconds
- Brief snap/pop per flash
- Skin slightly pink 30 min (fades)
- Mild tingling sensation
NOT Normal (Stop Use):
Burning pain lasting beyond flash
Blistering or welts
Skin darkening (hyperpigmentation)
Severe redness lasting 24+ hours
Area-Specific Sensations:
Least Sensitive (Barely Feel):
- Legs, arms, back, stomach
Moderate Sensitivity:
- Underarms, chest
Most Sensitive (Use Lower Intensity):
- Face (upper lip, chin)
- Bikini line
- Near joints (knees, elbows)
Pro Tips for Comfort:
- Shave 24 hours before (not the same day, stubble absorbs heat)
- Cool skin with an ice pack pre-treatment
- Start low intensity, increase each session gradually
- Avoid caffeine before (increases sensitivity)
Bottom line: 90% of users at correct intensity report IPL as "warm, not painful", far more comfortable than waxing or epilating, with better long-term results.
Which body areas work best with Pulsar, and how many treatments does each area need?
Pulsar works on most body areas, but effectiveness and treatment count vary; legs and underarms respond fastest (8 treatments), while the face takes the longest (12-16 treatments) due to hormonal influence.
Body Area Effectiveness Ranking:
EXCELLENT (8-10 treatments, 80-95% reduction):
Legs (Full or Half):
- Best area for IPL (large, accessible, coarse hair)
- Results visible by treatment 3-4
- 90-95% reduction achievable
- Fast treatment time (10-15 min full legs)
Underarms:
- Highly responsive (dark, coarse hair)
- Small area (2-3 minutes)
- 85-90% reduction is typical
- Excellent ROI
Arms (Full or Forearms):
- Very responsive
- Hair usually dark + visible
- 85-90% reduction
- 8-10 treatments are sufficient
GOOD (10-12 treatments, 70-85% reduction):
Bikini Line / Brazilian:
- Coarse hair responds well
- Sensitive area (use lower intensity = more treatments)
- 75-85% reduction is typical
- 10-12 treatments needed
- Note: Cannot treat labia minora, vagina, or anus directly (see restrictions)
Chest / Stomach:
- Responds well if dark hair is present
- Finer hair = slower results
- 70-80% reduction
- 10-12 treatments
Back / Shoulders:
- Men: Very responsive (coarse hair)
- Need assistance with the application
- 80-85% reduction
- 10-12 treatments
MODERATE (12-16 treatments, 60-75% reduction):
Face (Upper Lip, Chin, Sideburns):
- Hormonal hair = most stubborn
- Requires patience + consistency
- 60-75% reduction (rarely 90%+)
- 12-16 treatments minimum
- May need quarterly maintenance lifelong
- Women only: Men DO NOT use on face/beard area
Hands / Fingers / Toes:
- Small area, fine hair
- Moderate effectiveness
- 12-14 treatments
RESTRICTIONS (Do NOT Treat):
Absolute No-Go Areas:
- Around eyes/eyebrows
- Lips, nipples, areolas
- Genitals (labia minora, vagina, anus)
- Inside the nostrils, ears
- Over tattoos (within 1 inch)
- On moles, birthmarks
- Men: Face, neck, beard area, genitals
Conditional Restrictions:
- Near silicone implants (1 inch clearance)
- Piercings (remove before treatment)
- Areas with long-lasting deodorant (wait 24 hours)
Treatment Time per Area:
- Full legs: 15-20 minutes
- Underarms: 2-3 minutes
- Bikini line: 5-8 minutes
- Face (upper lip): 2 minutes
- Full back: 20-25 minutes (need help)
- Arms: 10-15 minutes
ROI by Area:
- Best value: Legs + underarms (fast results, visible difference)
- Good value: Bikini, arms, chest
- Patience required: Face (hormonal hair is stubborn)
Most users start with legs + underarms (fastest confidence boost), then expand to bikini and other areas once they see results.
What maintenance is needed after initial 8 treatments, and how long do results last?
After the initial 8 treatments, most users maintain 90-95% hair reduction with 1-2 touch-up sessions per year; results last indefinitely with minimal maintenance.
Post-Treatment Maintenance Schedule:
Months 3-6 (After Treatment 8):
- Frequency: Monthly treatments (once every 4 weeks)
- Purpose: Catch any stubborn follicles cycling into the growth phase
- Treatments needed: 2-3 additional sessions
- Result: Achieve 90-95% final reduction
Months 6-12:
- Frequency: Quarterly (every 3 months)
- Purpose: Touch up any fine regrowth
- Treatments needed: 2-4 sessions over 6 months
- Result: Maintain smooth skin
Year 2+:
- Frequency: 1-2X per year (every 6-12 months)
- Purpose: Maintenance only (minimal regrowth)
- Treatments needed: 1-2 annual sessions
- Result: Permanent maintenance phase
What to Expect Long-Term:
- Year 1: Near-complete smoothness (shave 1-2X monthly vs daily)
- Year 2-5: Minimal regrowth (touch up 1-2X yearly)
- Year 5+: Permanent reduction maintained (occasional touch-ups)
Variables Affecting Longevity:
Results Last Longer With:
- Complete initial 8-12 treatment protocol
- Consistent biweekly schedule (no skipping)
- Appropriate intensity for skin tone
- Quarterly maintenance year 1
Results May Diminish With:
- Hormonal changes (pregnancy, menopause, PCOS)
- Starting new medications (hormones, steroids)
- Thyroid conditions
- Skipping maintenance touch-ups
Hormonal Reactivation:
Events that can reactivate dormant follicles:
- Pregnancy (hormonal surge)
- Menopause (hormone fluctuation)
- PCOS / endocrine disorders
- Steroid use
Solution: Resume biweekly treatments, 4-6 sessions to reset the reduction
Comparison to Other Methods:
| Method | Duration | Maintenance |
|---|---|---|
| Shaving | 1-3 days | Daily |
| Waxing | 3-6 weeks | Monthly |
| Epilator | 2-4 weeks | Biweekly |
| Professional IPL | Years | 1-2X yearly |
| Pulsar IPL | Years | 1-2X yearly |
| Electrolysis | Permanent | None |
Pulsar = Professional-Level Longevity: Results last as long as professional clinic IPL ($1,600-4,000). Difference: Pulsar lets you own the device, making annual touch-ups free vs $200-300 per clinic session.
Realistic Long-Term Expectations:
- Year 1: 90-95% reduction, quarterly touch-ups
- Year 2-5: 85-95% maintained, 1-2 annual treatments
- Year 5+: Permanent maintenance with occasional touch-ups
Most users describe Pulsar results as "permanent reduction" rather than "permanent removal", meaning 90% of hair is gone forever, 10% fine regrowth managed with annual 20-minute touch-ups.
Can I use Pulsar with sensitive skin, and what precautions should I take?
Yes, Pulsar is safe for sensitive skin when starting at low intensity (Level 1-2) and gradually increasing based on your skin's response.
Sensitive Skin Protocol:
BEFORE First Use:
- Skin test mandatory: Treat a 2x2-inch area on the inner thigh
- Start Level 1: Lowest intensity
- Wait 48 hours: Check for reaction
- Normal: Mild pinkness fading within 2-4 hours
- Problem: Blistering, lasting redness, hyperpigmentation → DO NOT USE
Treatment Guidelines:
Level Selection:
- First 2 treatments: Level 1 only
- Treatment 3-4: Increase to Level 2 if no irritation
- Treatment 5+: Max Level 3-4 for sensitive skin (don't exceed)
Pre-Treatment:
- Shave 24 hours before (not the same day)
- Apply aloe vera 30 min before (soothes)
- Avoid exfoliants 48 hours before (acids, scrubs)
- No active acne, cuts, or irritation in the treatment area
Post-Treatment:
- Apply aloe vera immediately (cooling)
- Avoid hot showers for 6 hours (lukewarm only)
- No exfoliants 72 hours after
- SPF 30+ essential (skin photosensitive)
- Fragrance-free moisturizer only
Sensitive Skin Conditions:
SAFE (with caution):
- Eczema (not during flare-ups, only on clear skin)
- Rosacea (use Level 1, may improve redness)
- Dry sensitive skin (moisturize heavily post-treatment)
CONSULT DOCTOR:
- Psoriasis (depends on severity)
- Dermatitis (wait until healed)
- Autoimmune skin conditions
DO NOT USE:
- Active acne/cysts (treat face only when clear)
- Open wounds, cuts, infections
- Sunburn (wait until fully healed)
- Fresh tattoos (wait 6 months, then avoid the area)
Normal vs Concerning Reactions:
Normal (Safe to Continue):
- Slight warmth during flash
- Mild pinkness 1-4 hours
- Slight dryness/tightness (moisturize)
Stop Immediately:
- Blistering or burns
- Severe pain during treatment
- Redness lasting 24+ hours
- Hyperpigmentation (darkening)
- Allergic reaction (hives, swelling)
Pro Tips:
- Treat evening (gives skin overnight recovery)
- Space treatments 3 weeks apart vs 2 (for very sensitive skin)
- Use cooling gel packs during treatment
- Never exceed Level 4 if sensitive skin
Bottom line: Sensitive skin users can safely use Pulsar by starting low, progressing slowly, and never exceeding Level 3-4 intensity.
What are the safety guidelines, restrictions, and who should NOT use Pulsar?
Pulsar is FDA-cleared and safe for most users, but specific populations and areas have important restrictions.
Who Should NOT Use Pulsar:
Absolute Contraindications:
- Very dark skin (Fitzpatrick V-VI) - burn risk
- Pregnant or nursing (hormonal effects unknown)
- Children under 18 (developing skin)
- Photosensitive conditions (lupus, porphyria, vitiligo)
- Taking photosensitive medications (Accutane, certain antibiotics, tetracycline)
- Cancer patients or a history of skin cancer in the treatment area
- Epilepsy (flashing light trigger)
- Keloid scarring tendency
Consult Doctor First:
- Diabetes (poor wound healing)
- Immune disorders
- Active infections (herpes, fungal)
- Recent surgery (wait 6 months)
- Hormonal disorders (PCOS, thyroid, may reduce efficacy)
Body Area Restrictions:
NEVER Treat:
- Eyes/eyebrows area (blindness risk)
- Lips, nipples, areolas (severe burns)
- Genitals: labia minora, vagina, anus (mucosal tissue)
- Inside the nostrils, ears
- Men: Face, neck, beard areas, entire genital region
Safe Areas:
- Legs, arms, underarms, back, chest, stomach
- Women only: Face (upper lip, chin, sideburns), bikini line
Tattoo Safety:
CRITICAL: Stay 1 inch away from tattoo edges
Why: IPL light breaks apart tattoo ink molecules (same principle as laser tattoo removal). Direct IPL on tattoos causes:
- Ink distortion and fading
- Blurred tattoo lines
- Permanent damage to artwork
Safe Protocol:
- Mark a 1-inch boundary around the tattoo
- Treat the surrounding areas only
- Cover the tattoo with a white cloth if nearby
Other Restrictions:
Avoid Treatment On/Near:
- Moles, birthmarks (risk of change/damage)
- Varicose veins
- Open wounds, scars healing
- Active acne (face, wait until clear)
- Sunburn (wait 2-4 weeks for full healing)
- Recent fake tan (wait 2 weeks to fade)
Avoid Areas With:
- Silicone implants (1 inch clearance, breast implants, facial implants)
- Piercings (remove jewelry first)
- Permanent makeup (eyebrows, eyeliner, stay away)
- Long-lasting deodorant (wait 24 hours post-application)
Men-Specific Restrictions:
Why Men Cannot Treat Face/Beard: Male facial hair is too coarse, deep, and hormonal; at-home IPL has insufficient power. Professional ND: YAG laser required for safe, effective male facial hair removal.
Why Men Cannot Treat Genitals: Insufficient safety testing in male reproductive areas. Unknown effects on:
- Sperm production
- Testosterone levels
- Testicular function
Safe for Men: Back, chest, shoulders, arms, legs, stomach
Sun Exposure Rules:
BEFORE Treatment:
- Avoid the sun 2 weeks (no tan)
- No fake tan (spray tan, self-tanner, wait 2 weeks)
- Stop photosensitive supplements (St. John's Wort)
AFTER Treatment:
- SPF 30+ essential daily (4-6 weeks post-treatment)
- Avoid sun exposure for 48 hours
- Skin photosensitive, burn risk increased
Medication Interactions:
Stop 2 weeks before IPL:
- Accutane (isotretinoin)
- Tetracycline antibiotics
- St. John's Wort
Consult a doctor about:
- Hormone replacement therapy
- Steroids
- Blood thinners
Bottom line: Pulsar is safe for women, light-medium skin, dark hair, and avoiding restricted areas. Men: Back/body only. When in doubt, consult a dermatologist before first use.
Pulsar vs Braun Pro 5, Lumea Prestige, Ulike Air3
Why Pulsar stands out among the rest.
Not specified
Not listed
Not listed
Hair removal + “skin comfort”
Air-vent cooling (non-sapphire)
Low
Low
HR only
